Angular Contact Ball Bearings

Contact Now

    Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

     single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable

    The load lines of the angular contact bearings back to back are separated from the bearing shaft. It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearingBack-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.

0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 3205AC3 Angular Contact Ball Bearings

C0-Medium 12.402 Inch | 315 Mi
N/A Shaft Mount

0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 3204SC3 Angular Contact Ball Bearings

Triple Lip D-Lock Ball Bearing
440 STAINLESS STEEL Not Applicable

0.787 Inch | 20 Millimeter x 1.85 Inch | 47 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 3204AC3 Angular Contact Ball Bearings

Metric 15 Degree
Ball Bearing Phenolic

0.669 Inch | 17 Millimeter x 1.575 Inch | 40 Millimeter x 0.689 Inch | 17.5 Millimeter NTN 3203SC3 Angular Contact Ball Bearings

DODGE N/A
087192 Double Row
1/16